Difference between revisions of "GLO"
(→Approval) |
|||
| Line 121: | Line 121: | ||
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: | This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: | ||
| − | + | #this device may not cause harmful interference, and | |
| − | + | #this device must accept any interference received, including interference that may cause undesired operation. | |
| − | + | ||
| − | + | ||
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: | This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: | ||
| − | |||
* Reorient or relocate the receiving antenna. | * Reorient or relocate the receiving antenna. | ||
| − | |||
* Increase the separation between the equipment and the receiver. | * Increase the separation between the equipment and the receiver. | ||
| − | |||
* Connect the equipment into an outlet that is on a different circuit from the GPS unit. | * Connect the equipment into an outlet that is on a different circuit from the GPS unit. | ||
| − | |||
* Consult the dealer or an experienced radio/TV technician for help. | * Consult the dealer or an experienced radio/TV technician for help. | ||
Latest revision as of 17:14, 26 May 2015
| EN | UK | RU |
GLO is a GPS/GLONASS receiver with Bluetooth® technology that provides precise position information on many iPad®, iPhone®, Android™, Windows® or Blackberry® smartphones, tablets and notebooks.
Original Manufacturer: Garmin
Status: in production (since 2012)
Application: general aviation
HS Code: 8526912020, 8526912099
ATA 100/JACS Code: 34-57
Contents
Part Numbers
| Catalog P/N | Unit P/N | Description |
| 010-01055-15 | N/A | Consumer version of GLO |
| 010-01055-00 | N/A | GLO for aviation |
Features
- GLO can receive position information from both the GPS and GLONASS satellites, allowing it to connect to up to 24 more satellites than devices that rely on GPS alone. This allows GLO to lock on to satellites approximately 20% faster and remain connected even at high speed. GLO updates its position information at 10x per seconds, that is up to 10x more often than the GPS receivers in many mobile devices.
- GLO for Aviation wirelessly pairs to up to 4 devices simultaneously.
- The device features up to 12 hours of battery life to keep your position on even the longest of flights, and charging GLO between uses is a cinch with the included USB cable or 12/24-V cigarette lighter adapter.
- Compatible with Garmin Pilot™, Garmin Tracker™, Garmin StreetPilot® Onboard, Fishing My-Cast® and Garmin Fit™.
In the Box
GLO (Aviation Bundle) Version
- GLO receiver
- Vehicle Power Cable P/N 010-10563-00
- USB cable
- Portable Friction (anti-skid) Mount P/N 010-11832-00
- Free 6 month trial of Garmin Pilot
GLO Consumer Version
- GLO receiver
- Vehicle Power Cable P/N 010-10563-00
- USB cable
Specifications
| Unit size, WxHxD | 70" x 1.65" x 3.04" (1.78 x 4.19 x 7.72 cm) |
| Weight | 2.12 oz (60.1 g) |
| Receiver technology | GPS+GLONASS |
| WAAS | Yes |
| Update rate | 10 Hz |
| Accuracy | 3 meters |
| Battery capacity | 1100m Ah |
| Battery life | 12 hours |
| Simultaneous Bluetooth connections | 4 |
| Hot start time | 3-5 s |
| Warm start time | 35 s |
| Cold start time | 60 s |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Charging Temperature | 32°F to 113°F (0°C to 45°C) |
| Short-Term (1 month) Storage Temperature | -4°F to 122°F ( -20°C to 50°C) |
| Long-Term (1 year) Storage Temperature | -4°F to 68°F (-20°C to 20°C) |
GPS receiver has a nominal operating velocity range of 0 – 800 kts (411 m/s)
Approval
Declaration of Conformity
Click here to download.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet that is on a different circuit from the GPS unit.
- Consult the dealer or an experienced radio/TV technician for help.
Accessories
- GLO Portable Friction Mount P/N 010-11832-00
- USB Power Cable P/N 010-11131-10
- Belt Clip P/N 010-10838-10
Operation
See English Instruction #190-01492-00
See Multi-Language Instruction #190-01492-91
Maintenance
Other than for regulatory checks, maintenance of the GLO is ‘on condition’ only.
This device can be repaired only at the Garmin factory or a Garmin authorized service center.